Piston Cylinder Boundary Work Thermodynamics - 搜索视频

搜索
图片
视频
地图
资讯
购物
更多
笔记本

时长
全部短(小于 5 分钟)中(5-20 分钟)长(大于 20 分钟)
日期
全部过去 24 小时过去一周过去一个月去年
清晰度
全部低于 360p 360p 或更高 480p 或更高 720p 或更高 1080p 或更高
源
全部
Dailymotion
Vimeo
Metacafe
Hulu
VEVO
Myspace
MTV
CBS
Fox
CNN
MSN
价格
全部免费付费
重置

安全搜索:
中等
严格中等（默认）关闭

筛选器

最匹配的结果

a fluid contained in a piston cylinder device receives 200 kj of electrical work as the gas expands against the piston and does 400 kj of boundary work on the piston during the process800 kj 32329

a fluid contained in a piston cylinder device receives 200 kj of electrical work as the gas expands against the piston and does 400 kj of boundary work on the piston during the process800 kj 32329

已浏览 101 次7 个月之前

SOLVED: A piston-cylinder device initially contains 0.4 kg of nitrogen gas at 160 kPa and 14Â°C. The nitrogen is now expanded isothermally to a pressure of 100 kPa. Determine the boundary work done during this process.

SOLVED: A piston-cylinder device initially contains 0.4 kg of nitrogen gas at 160 kPa and 14Â°C. The nitrogen is now expanded isothermally to a pressure of 100 kPa. Determine the boundary work done during this process.

2022年4月7日

Gas is enclosed in a cylinder with a weighted piston as the top boundary. The gas is heated and expands from a volume of 0.04 m3 to 0.10 m3 . The pressure varies such that ???????? is constant, and the initial pressure is 2.04 kgf/cm2 . What is most nearly the work done by the system?

Gas is enclosed in a cylinder with a weighted piston as the top boundary. The gas is heated and expands from a volume of 0.04 m3 to 0.10 m3 . The pressure varies such that ???????? is constant, and the initial pressure is 2.04 kgf/cm2 . What is most nearly the work done by the system?

2022年1月6日

SOLVED:During some actual expansion and compression processes in piston-cylinder devices, the gases have been observed to satisfy the relationship P V^n=C where n and C are constants. Calculate the work done when a gas expands from 350 kPa and 0.03 m^3 to a final volume of 0.2 m^3 for the case of n=1.5.

SOLVED:During some actual expansion and compression processes in piston-cylinder devices, the gases have been observed to satisfy the relationship P V^n=C where n and C are constants. Calculate the work done when a gas expands from 350 kPa and 0.03 m^3 to a final volume of 0.2 m^3 for the case of n=1.5.

2020年5月12日

A vertical 12 -cm diameter piston-cylinder device contains an ideal gas at the ambient conditons of 1 bar and 24^∘ C . Initially, the inner face of the piston is 20 cm from the base of the cylinder. Now an external shaft connected to the piston exerts a force corresponding to a boundary work input of 0.1 kJ . The temperature of the gas remains constant during the process. Determine ( a ) the amount of heat transfer, (b) the final pressure in the cylinder, and ( c ) the distance that the piston i

A vertical 12 -cm diameter piston-cylinder device contains an ideal gas at the ambient conditons of 1 bar and 24^∘ C . Initially, the inner face of the piston is 20 cm from the base of the cylinder. Now an external shaft connected to the piston exerts a force corresponding to a boundary work input of 0.1 kJ . The temperature of the gas remains constant during the process. Determine ( a ) the amount of heat transfer, (b) the final pressure in the cylinder, and ( c ) the distance that the piston i

2020年5月12日

A piston-cylinder undergoes an isobaric process with P = 150 ps... | Filo

A piston-cylinder undergoes an isobaric process with P = 150 ps... | Filo

已浏览 5994 次8 个月之前

A piston–cylinder device initially contains 0.35 kg of steam at... | Filo

A piston–cylinder device initially contains 0.35 kg of steam at... | Filo

Air goes through a polytropic process with n= 1.3 in a piston/cylinder setup. It starts at 200 kPa 300 K and ends with a pressure of 2200 kPa. Find the expansion ratio v2 / v1, the specific work, and the specific heat transfer. | Numerade

10 个月之前

SOLVED:An insulated piston-cylinder device contains 5 L of… | Numerade

10 个月之前

A frictionless piston-cylinder device initially contains 200 L of saturated liquid refrigerant-134a. The piston is free to move, and its mass is such that it maintains a pressure of 800 kPa on the refrigerant. The refrigerant is now heated until its temperature rises to 50^∘ C. Calculate the work done during this process. FIGURE P4–15 can't copy | Numerade

A piston-cylinder device initially contains 0.07 m^3 of nitrogen gas at 130 kPa and 120^∘ C. The nitrogen is now expanded polytropically to a state of 100 kPa and 100^∘ C. Determine the boundary work done during this process. | Numerade

2020年5月12日

A piston-cylinder device initially contains 0.4 kg of nitrogen gas at 160 kPa and 140^∘ C. The nitrogen is now expanded isothermally to a pressure of 100 kPa. Determine the boundary work done during this process. | Numerade

2021年1月12日

SOLVED:A vertical piston-cylinder device initially contains 0.25 m^3 of air at 600 kPa and 300^∘ C. A valve connected to the cylinder is now opened, and air is allowed to escape until three-quarters of the mass leave the cylinder at which point the volume is 0.05 m^3 . Determine the final temperature in the cylinder and the boundary work during this process.

2020年5月12日

A piston-cylinder device contains 4 kg of argon at 250 kPa and 35^∘ C. During a quasi-equilibrium, isothermal expansion process, 15 kJ of boundary work is done by the system, and 3 kJ of paddle-wheel work is done on the system. Determine the heat transfer for this process. | Numerade

2021年1月12日

Air is contained in a piston-cylinder device at 600 kPa and 927^∘ C, and occupies a volume of 0.8 m^3 . The air undergoes and isothermal (constant temperature) process until the pressure in reduced to 300 kPa. The piston is now fixed in place and not allowed to move while a heat transfer process takes place until the air reaches 27^∘ C (a) Sketch the system showing the energies crossing the boundary and the P - V diagram for the combined processes. (b) For the combined processes determine the ne

2020年5月12日

SOLVED:A piston-cylinder device contains 5 kg of air at 400 kPa and 30^∘ C . During a quasi-equilibium isothermal expansion process, 15 kJ of boundary work is done by the system, and 3 kJ of paddle-wheel work is done on the system. The heat transfer during this process is (a) 12 kJ (b) 18 kJ (c) 2.4 kJ (d) 3.5 kJ (e) 60 kJ

2020年5月12日

A vertical 10-cm-diameter piston-cylinder device contains an ideal gas at the ambient conditions of 1 bar and 24^∘ C. Initially, the inner face of the piston is 20 cm from the base of the cylinder. Now an external shaft connected to the piston exerts a force corresponding to a boundary work input of 0.1 kJ . The temperature of the gas remains constant during the process. Determine (a) the amount of heat transfer, (b) the final pressure in the cylinder, and (c) the distance that the piston is d

2021年1月12日

VIDEO solution:An insulated piston-cylinder device contains 0.05 m^3 of saturated refrigerant- 134 a vapor at 0.8 -MPa pressure. The refrigerant is now allowed to expand in a reversible manner until the pressure drops to 0.4 MPa. Determine (a) the final temperature in the cylinder and (b) the work done by the refrigerant. | Numerade

10 个月之前

A piston-cylinder device initially contains 0.35-kg steam at 3.5 MPa, superheated by 7.4^∘ C. Now the steam loses heat to the surroundings and the piston moves down, hitting a set of stops at which point the cylinder contains saturated liquid water. The cooling continues until the cylinder contains water at 200^∘ C. Determine (a) the final pressure and the quality (if mixture), (b) the boundary work, (c) the amount of heat transfer when the piston first hits the stops, (d) and the total heat tra

2020年5月12日

A piston-cylinder device contains 0.15 kg of air initially at 2 MPa and 350^∘ C. The air is first expanded isothermally to 500 kPa, then compressed polytropically with a polytropic exponent of 1.2 to the initial pressure, and finally compressed at the constant pressure to the initial state. Determine the boundary work for each process and the net work of the cycle. | Numerade

2021年1月12日

SOLVED: ~cylinder device contains 25 g of saturated water vapor piston - constant pressure of 300 kPa resistance that IS maintained at is turned on and passes current of 0.2 hcater within the cylinder 120-V source: At the same time heat loss of for 5 min from Show that for closed system the boundary work 3.7 kJ occurs. (a) Wb and the change in internal energy AU in the first-law relation can be combined into one lerm; AH,for a constant pressure process: (b) Determine the final temperature of the

2021年9月25日

Excellent boundary work 👌... - IPL - Indian Premier League

已浏览 151.1万次7 个月之前

FacebookIPL - Indian Premier League

Philippine Star - Driver and operator members of transport...

已浏览 1689 次8 个月之前

FacebookPhilippine Star

One of the toughest things you must deal with during boundary work is other people… If you want to start making changes click the link in my bio and download my free guide. You can also sign up for my new course opening in April. The waiting list is there as well! www.Stan.store/nickpollardexperience Learn to:�Set Boundaries Design the life you want Find meaning in your day-to-day life Enjoy more freedom Discover your Passions #peoplepleaser #boundaries #selfcare #discard #addiction #sober #narc

已浏览 1.8万次2 个月之前

FacebookNick Pollard Coach

Thermodynamics 5-130 A vertical piston–cylinder device initially contains 0.25 m3 of air at 600 kPa

已浏览 91 次1 个月前

YouTubeSuemon Kwok

Thermodynamics 4-76 A piston–cylinder device contains 4 kg of argon at250 kPa and 35°C. During a

已浏览 299 次7 个月之前

YouTubeSuemon Kwok

THERMO PART 10 BOUNDARY WORK

已浏览 33 次2020年7月6日

YouTubeMECHANICAL LAND

COMBINATION OF THERMAL AND DYNAMIC OF PISTON AND CYLINDER I

已浏览 1000 次2018年1月6日

YouTubeBharatha

Thermo 4.2 - Boundary Work - Part 2

已浏览 2226 次2021年6月11日

YouTubeCollege Fluid Mechanics

已浏览 43 次2019年10月14日

YouTubeHessam Taherian

观看更多视频

静态缩略图占位符

报告不当内容

请选择下列任一选项。

无关

低俗内容

成人

儿童性侵犯

© 2024 Microsoft

隐私声明和 Cookie
法律声明
广告
关于我们的广告
帮助
反馈
消费者健康隐私