Ultra Light Grudge Triple Tree | 1/2″ Offset - DME Racing
DME Racing’s Ultra Light Grudge Triple Tree is the lightest option available for a rigid fork setup. Our Triple Tree clamps directly to the inner fork tube’s allowing you to eliminate all inner fork components; tube, seals, and fluid.
Motorcycle Triple Tree | 1/2" Offset - DME Racing
DME Racing’s Triple Tree for the Suzuki Hayabusa and GSX-R1000 allows you to lower the front end and slide the fork tube through the clamps.
DME Hayabusa Triple Tree 1″ Offset
DME Racing’s 1″ Offset Triple Tree for the Suzuki Hayabusa allows you to lower the front end and slide the fork tube through the clamps. Select Finish:* Frame Set-up: * We need to know if your frame is stock or if it has been short-necked.
offset triple clamp options? Who makes em | Suzuki GSX-R …
2010年1月6日 · These trees will have adjustable offset as well as a stepped top clamp where you can slide your tubes down up to 10 mm without using fork extenders. It will be able to have a GPR bolt right on the top.
Offset Triple Clamps - nlrsystems.com
These offset clamps are on every bike built by NLR, DME and many other top builders in the industry. Safety is of the utmost concern so we have made our clamps with a smaller bore size which requires the fork tubes to be machined down.
McCoy Motorsports Machined Billet Aluminum Hayabusa GRUDGE …
McCoy Motorsports Hayabusa GRUDGE Triple Trees 43mm For use with Lower Fork Leg Only * FORKS NOT INCLUDED ** STEM NOT INCLUDED.
Turned down Busa forks for DME Offset triple trees?
2018年10月8日 · I have 50/52mm gen2 forks on my prostreet Hayabusa. They are good for at least 6.76 ET and 216mph out back.
Turned down Busa forks for DME Offset triple trees | 1/4 Mile
2018年10月5日 · I have Gen2 front forks and i want to turn them doun to 52mm at the lower triple tree for more lowering the front end...
OFFSET TRIPLE TREE/CLAMP QUESTION................. - 13x Forums
2018年2月22日 · Attack triple clamps come with different offset inserts So say you have 28mm offset with a 0 insert. If you put in a 2mm insert you have 26mm offset or 30mm offset depending on how you install the inserts.
Suspension - DME Racing
DME Rear Brake Hanger And Xtra Light Rotor and Beringer Caliper – Gen 1 Hayabusa $