how to enable touch screen in imx51?? - NXP Community
2011年11月14日 · Here's what I wound up doing to get the touchscreen calibrated and operating properly under the minimal Linux configuration (with the addition of Qt Embedded with associated Touch Screen library - tslib). First and foremost, you must change the egalaxy touch screen driver to disable multi-touch.
12. input子系统:触摸屏 — [野火]快速使用手册——基于i.MX6ULL开 …
野火imx6ull提供了很多的设备树插件，用于控制板子上外设的开启，默认状态下开启7寸触摸屏相关插件， 如果不能触摸需要确认触摸屏相关的设备树插件。 修改 /boot/uEnv.txt 文件内容， 使能触摸屏设备树相关插件内容以及i2c1设备树插件并重启开发板。 如果是7寸屏幕修改. dtoverlay=/usr/lib/linux-image-4.19.35-imx6/overlays/imx-fire-i2c1.dtbo. dtoverlay=/usr/lib/linux-image-4.19.35-imx6/overlays/imx-fire-touch-capacitive-goodix.dtbo.
9. 输入子系统–电阻触摸驱动实验 — [野火]嵌入式Linux驱动开发实 …
与一般的微处理器 不同，本节使用的imx6ull内自带触摸屏控制器，只需要把电阻触摸屏的信号线接到对应的IO即可，通过配置imx6ull 触摸屏控制器获取触点坐标值。 9.1. TSC 触摸屏控制器介绍 ¶. 触摸屏系统由三个部分组成，它们分别是TSC控制器、TSC_ANA、ADC。 其中，TSC控制器是整个系统的核心， 负责为 TSC_ANA 和 ADC 提供控制信号，实现电阻屏的触摸检测和触点坐标测量；TSC_ANA根据TSC控制器 提供的信号负责向电阻屏的 X+、X-、Y+、Y- 四根线提供正负电 …
imx8mm touch - NXP Community
2020年1月4日 · I used imx8mm yocto to build the environment as DISTRO = fsl-imx-wayland. When the board started, I ran weston-touch-calibrator to calibrate the touch screen. After calibration, he worked well, but I need to calibrate every time I restart. Once, is there any way to make him calibrate once?
11. input子系统:触摸屏 — [野火]EBF_8MMINI开发板快速使用手册
野火IMX8M提供了很多的设备树插件，用于控制板子上外设的开启，首先我们先需要开启触摸屏相关的设备树插件。 修改 /boot/uEnv.txt 文件内容， 使能触摸屏设备树相关插件内容，并且重启。 如果是20240912之前的镜像，仅支持野火5.5寸mipi屏幕，因为HDMI是通过mipi转的，开启mipi屏幕的时候需要关闭HDMI插件，然后开启触摸和mipi设备树插件： dtoverlay= /usr/lib/linux-image-5.4.47-imx8mm/freescale/overlays/imx8mm-fire-mipi-hx8399.dtbo.
Imx6 touchscreen calibration - NXP Community
2019年10月4日 · I need to calibrate touch screen because, when I touch near to display's border theres is a difference between the cursor and the point touched (uncalibrated). First, I used xinput_calibrator, changing transformation matrix but i tried differents parameters configurations and I couldn't improved the function as I needed.
linux - add touchscreen support imx6 - Stack Overflow
2018年5月21日 · I am working with a imx6 dual light digi board. I want to add Ad7879 touch support. I 've been followed the next steps: -First I changed the kernel config file adding support fo touchscreen and ad...
Getting Started with the i.MX 8M Plus EVK | NXP Semiconductors
2021年2月10日 · This document provides a brief overview on how to get started with the i.MX 8M EVK and the IMX-MIPI-HDMI accessory card, which is used for converting the MIPI-DSI signal to an HDMI signal. AN12187 Quick Start Guide for MINISASTOCSI for i.MX 8M Evaluation Kit
Touchscreen support on IMX6 Evaluation Kit - NXP Community
2012年6月28日 · I bought IMX6 evaluation kit from Freescale. The package has 7" PRGB 800x480 IMX6QSB Development kit (LCD + resistive touch screen). The LCD display work fine out of box. I need to compile kernel 3.0.15 to add touch screen support. I tried with TSC2007 and egalax but not able to make it work.
imx6 touchscreen calibration - Digi Technical Support Forums
2019年10月4日 · I am working with a imx6 digi board, OS linux, kernel version 4.9 builded with yocto 2.4. I need to calibrate touch screen because, when I touch near to display’s border theres is a difference between the cursor and the point touched (uncalibrated).
跳至内容