The SN74HC164 is an 8-bit shift register with 2 serial inputs (A and B) connected through an AND gate, as well as an asynchronous clear (CLR). The device requires a high signal on both A and B in order to set the input data line high; a low signal on either input will set the input data line low.
SN74HC164 data sheet, product information and support | TI.com
TI’s SN74HC164 is a 8-Bit Parallel-Out Serial Shift Registers. Find parameters, ordering and quality information.
The 74HC164; 74HCT164 is an 8-bit serial-in/parallel-out shift register. The device features two serial data inputs (DSA and DSB), eight parallel data outputs (Q0 to Q7). Data is entered serially through DSA or DSB and either input can be used as an active HIGH enable for data entry through the other input. Data is shifted on the LOW-to-HIGH
74HC164 Datasheet (PDF) - NXP Semiconductors
Description: 8-bit serial-in/parallel-out shift register. Manufacturer: NXP Semiconductors.
- [PDF]
74HC164
The 74HC164 is a serial input 8-bit edge-triggered shift register that has outputs from each of eight stages. The serial input data is entered at pin SDA or pin SDB as these are logically ANDED. Either input could be used as an active HIGH enable with data entry on the other pin.
The 74HC164; 74HCT164 is an 8-bit serial-in/parallel-out shift register. The device features two serial data inputs (DSA and DSB), eight parallel data outputs (Q0 to Q7).
The ’HC164 and ’HCT164 are 8-bit, serial-in, parallel-out, shift registers with asynchronous reset. Data is shifted on the positive edge of Clock (CLK). A LOW on the RESET (CLR) pin resets the shift register and all outputs go to the LOW state regardless of the input conditions.
It has the high noise immunity and low consumption of standard CMOS integrated circuits. It also offers speeds comparable to low power Schottky devices. This 8−bit shift register has gated serial inputs and CLEAR. Each register bit is a D−type master/slave flip− flop. Inputs A & B permit complete control over the incoming data.
The MC74HC164A is an 8−bit, serial−input to parallel−output shift register. Two serial data inputs, A1 and A2, are provided so that one input may be used as a data enable. Data is entered on each rising edge of the clock. The active−low asynchronous Reset overrides the …
74HC164D (8-bit serial-in, parallel-out shift register) - Nexperia
The 74HC164; 74HCT164 is an 8-bit serial-in/parallel-out shift register. The device features two serial data inputs (DSA and DSB), eight parallel data outputs (Q0 to Q7). Data is entered serially through DSA or DSB and either input can be used as an active HIGH enable for data entry through the other input.
- 某些结果已被删除